Book Chapters:
- Elahi, B., Amiri Tokaldany, S., “Application of Internet of
Things-Aided Simulation and Digital Twin Technology in Smart Manufacturing”, in Advances
in Mathematics for Industry 4.0, edited by Ram, M., Academic Press. Elsevier
publication, pp. 335-359.
- Alasti, H., Elahi, B., Mohammadpour, A., “Risk-Preventative Workforce
Training Using Virtual Reality in Automated Robotic Sites” in Simulation for Industry
4.0, Past, Present, and Future, edited by Gunal, M., publisher: Springer
, 2019.
- 3. Franchetti, M., Elahi, B., Ghose, S., “Green Supply Chain,
Logistics, and Transportation”, in Green and Lean Management, edited by Machado C.
and Davim J.P., publisher: Springer, pp.1-16. 2017.
- M. Franchetti, Elahi, B., S. Ghose (2016), “Value Creation
through
Sustainable Manufacturing: Practical Implementation Roadmap”, First Edition,
Industrial
Press,
South Norwalk, CT, ISBN: 9780831135218.
Refereed Journal Publications: (12 in-print, 1 under review):
- Elahi, B., “Evaluation of Waste Disposal Alternatives in a Healthcare System”, To be
submitted for
the Journal of Resources, Conservation and Recycling, Elsevier.
- Elahi, B., Deheshvar, A., Franchetti, M., Amiri Tokaldany, S., “Optimal Performance
Evaluation of
Adaptive X Control Charts”, Journal of Industrial Engineering International, Springer
,
(Accepted for publication)
- Cochran, D. S., Swartz, J., Elahi, B., Smith, J., “Using a Collective System Design
Technique to Improve
a Regional Medical Center Emergency Room Performance”, Journal of Medical Systems
, 42(12), 242 (1-8), 2018.
- Rojas-Downing, M., Nejadhashemi, A.P., Elahi, B., Cassida, K.A., Daneshvar, F., J.
Hernandez-Suarez,
S.J., Abouali, M., Herman, M.R., Masraf, S.A.D.A., Harrigan, T., “Food Footprint as a
Measure of
Sustainability for Grazing Dairy Farms”, Environmental Management, Springer,
62(6), pp.1073-1088, 2018.
- Daneshvar, F., Nejadhashemi, A.P., Adhikari, U., Elahi, B., Abouali, A., Herman,
M.R.,
Martinez-Martinez, E., Calappi, T.J., Rohn, B.G., “Evaluating the Significance of Wetland
Restoration
Scenarios on Phosphorus Removal”, Journal of Environmental Management, Elsevier
, 192, 184-196, 2017.
- Akhavan, P., Elahi, B., and Jafari, M. (2014), “A new integrated knowledge model in
supplier selection:
The case of an Asian automotive supply chain”, Journal of Education, Business and
Society: Contemporary
Middle Eastern Issues 7(4), 333-368.
- Mazdeh, M.M., Razavi, S.M., Hesamamiri, R., Zahedi, M.R., and Elahi, B., (2013), “An
empirical
investigation of entrepreneurship intensity in Iranian state universities”, Higher
Education, Springer 65
(2), 207-226.
- Elahi, B., Seyed-Hosseini, S. M., and Makui, A. (2011), “A fuzzy compromise
programming solution for
supplier selection in quantity discounts situation”, International Journal of
Industrial Engineering &
Production Research 22(2), 107–114.
- Seyed-Hosseini, S. M., Elahi, B., and Makui, A. (2011), “Proposing a Mathematical
Programming Model for
Optimization of Supply Chain Scheduling”, Academy of Business Research Journal (ABRJ)
1, 64–75.
- Badkoobehi, H., Elahi, B., and Makui, A. (2011), “A Novel Economic Modeling for
Supply Chain Planning:
A Three-Echelon Supply Chain”, Business Research Yearbook XVIII (2), 433–439.
- Elahi, B., Pakzad-Jafarabadi, Y., Etaati, L., and Seyedhosseini, S. M. (2011),
“Optimization of supply
chain planning with considering defective rates of products in each echelon,”
Technology and Investment 2
(3), 211–221.
- Seyedhosseini, S.M., Elahi, B., and Akhlaghy, A. (2011) “Proposing a Non-Linear
Mathematical Model for
Order Splitting in a Supply Chain with Perishable Products: Solving by Genetic Algorithm”,
International
Journal of Business Research: special issue of the international academy of business and
economics 11(4),
104-111.
- Seyed-Hosseini, S.M., Elahi, B., and Barzinpour, F. (2010), “Multi-Supplier, Product
and Buyer, Mixed
Integer Order Splitting in a Two-Echelon Supply Chain”, Journal of International
Management Studies: special
issue of the international academy of business and economics 10 (3), 171-178.
Selected Peer-Reviewed Conference & Symposium Research Papers: (22 papers):
- Elahi, B.,, Lambert, D. (May 30-June 02, 2020). Statistical Process Control of
Glenosphere Implants
to Enhance Shoulder Arthroplasty. Institute of Industrial and Systems Engineers (IISE) 2020
Annual
Conference
and Expo, Industrial and Systems Engineering Research Conference (ISERC) New
Orleans, LA. (Abstract
is accepted)
- Elahi, B., Alasti, H., Mohammadpour, A. (April 23-24, 2020). Application of
Proximity Sensors to
Enhance Ambient Awareness for a Six-Axis Robot Arm. 14th International Conference on
Mechatronic Sensors,
Resistivity, and Resistance (ICMSRR 2020), Boston, MA. (Abstract and paper are
accepted)
- Elahi, B., Wooten, W. (May18-21, 2019). A Novel Optimization Planning Model in Green
Supply Chain
Networks. Institute of Industrial and Systems Engineers (IISE) 2019 Annual Conference
and Expo,
Industrial and
Systems Engineering Research Conference (ISERC) Proceeding, Orlando, FL.
- Ottah E., Elahi, B. (March 17-20, 2019). The Effect of Heat Treatment Techniques on
the Mechanical
Properties of a Medium-Carbon Steel. In Industry Engineering & management Systems
(IEMS) 25th Annual
International Conference Proceeding, Clearwater, FL.
- Elahi, B., Leeth, R. (March 17-20, 2019). Using the Design of Experiment Technique to
Improve the
Ultimate Tensile Strength and Ductility of the Cold Drawn L-605® Wire. In Industry
Engineering &
management
Systems (IEMS) 25th Annual International Conference Proceeding, Clearwater, FL.
- Cochran, D. S., Elahi, B., and Spurlock, T. (May 2017). “System Re-Design of First
Tier Automotive
Value Stream”, Institute of Industrial and Systems Engineers (IISE) 2017 Annual
Conference and Expo,
Industrial
and Systems Engineering Research Conference (ISERC) Proceeding, Pittsburgh, PA.
- Rojas-Downing, M.M., Nejadhashemi, A.P., Elahi, B., Cassida, K.A., Daneshvar, F.,
Hernandez-Suarez,
J.S., Abouali, M., Herman, M.R., Al Masraf, S.A.D. and Harrigan, T., (July 29-August 01,
2018). A New Measure to
Address Sustainability on Dairy Production. In ASABE Annual International Conference
Proceeding,
Detroit, MI.
- Elahi, B., (June 2019) “Implementation of a Project-Based Learning Approach, Case
study of
“Measurement and Evaluation Techniques in Industrial Engineering”, ASEE 2019, the
126th Annual Conference
&
Exposition, Tampa, FL.
- Elahi, B., (June 2018). “Lesson Learned from Students’ involvement in a Research
Project on
Evaluation of Recycling Opportunities and Waste Disposal Alternatives in a Health Care
System”, ASEE
2018,
Proceedings of the 125th Annual Conference & Exposition, Salt Lake City, Utah.
- Elahi, B., (April 2018) “Student Involvement in a research project: Using Design of
Experiment to
Improve Cutting Glass Process in an Auto-Glass Manufacturing Company”,
Illinois-Indiana ASEE Section
Regional
Conference, Purdue University, West Lafayette, Indiana.
- Elahi, B., (June 2017) “Implementation of a Learning Assessment: Case study of
Applied Statistics
Course in Industrial Engineering”, ASEE 2017, Proceedings of the 124th Annual
Conference & Exposition
, Columbus,
Ohio.
- Elahi, B., (October 2019) “A Successful Project-Based Learning Experience: Case Study
of Fort Wayne
Metal Research Project”, 4th Annual Alliance Teaching Showcase, PFW.
- Elahi, B., (September 2018) “Project-Based Learning Approach in Higher Education Case
study of
“Measurement and Evaluation in Industrial Technology” Course (IT 507)” 3rd Annual
Alliance Teaching Showcase,
PFW.
- Elahi, B., (September 2017) “Undergrad Student Involvement in Research Project Case
study of Applied
Statistics Course in Engineering Technology” poster presentation, 2nd Annual Alliance
Teaching Showcase, PFW.
- Franchetti, M., Elahi, B., and S. Ghose. “Value Creation by Sustainable
Manufacturing”, Air & Waste
Management Association’s 110th Annual Conference and Exhibition, New Orleans,
LA, June 2016.
- Elahi, B., Franchetti, M. “A Multi-Objective Proposed Mathematical Model for a Health
Care Supply
Chain with Perishable Product”, IIE Annual Conference and Exhibition,
Nashville, TN, June 2015.
- Elahi, B., Franchetti, M., “A New Guideline for Improving Quality Control in
Production and
Statistical Processes”, Midwest graduate research symposium, Toledo, OH,
March 2015.
- Elahi, B., Franchetti, M. “A new optimization model for closed-loop supply chain
networks”, IEEE
International Technology Management Conference (ITMC), Chicago, Illinois, pp.
1-9., June 2014.
- Elahi, B., Franchetti, M. “Optimization Modeling for Green Supply Chain Planning”,
Air & Waste
Management Association’s 107th Annual Conference and Exhibition, Chicago, IL,
June 2013.
- Elahi, B., Etaati, L., and Seyed-Hosseini, S.M. “An Integrated Modeling for Supplier
Selection and
Optimal Lot Sizing: A Case Study of Four-Echelon Supply chain”, IEEE International
Technology Management
Conference (ITMC), pp. 877 – 884, San Jose, CA, June 2011.
- Elahi, B., Seyed-Hosseini, S.M., and Makui, A. “A New Strategic Modeling Approach for
Optimization of
a Four-Echelon Supply Chain”, proceeding of the 6th International Congress on
Logistics and SCM Systems (ICLS
2011), pp.281-293, Kaohsiung, Taiwan, March 2011.
- Elahi, B., Seyed-Hosseini, S.M., and Makui, A. “Developing A New MCDM Approach for
Selecting
Suppliers in a Supply Chain under Uncertain Environment”, proceeding of the 6th
International Congress on
Logistics and SCM Systems (ICLS 2011), pp.655–667, Kaohsiung, Taiwan, March
2011.